banner



How To Repair A Samsung Remote

Download Article

Download Article

There are many dissimilar reasons why your Samsung remote no longer works ranging from a muddy receiver to a dead battery. This wikiHow volition teach you how to repair a Samsung remote using a few different methods.

Steps

  1. 1

    Remove the batteries and hold whatsoever button for 20 seconds. This action will articulate (or attempt to clear) any electronic glitches that may be preventing your remote from working.

  2. 2

    Reinsert the batteries. If your remote works now, you'll know it was an electrical glitch and may need to repeat this process later.

    • If your remote still does not work, continue to the next step.

    Advertisement

  3. three

    Supervene upon the batteries. This is the most common issue with remotes and the easiest to fix. But replace the existing batteries with new ones. Make certain you lot're replacing the right size (AA vs AAA) and positioning them correctly (the within of the bombardment slot should tell y'all which side is negative and which side is positive).

    • If your remote still does non work, continue to the side by side pace.
  4. iv

    Clean the transmission window. If replacing the batteries did not work, attempt cleaning the upper edge of your remote. This is where the information leaves your remote to transmit to the Television, so if you have a remote with an LED manual light, make sure that window is make clean and so the information is complimentary to leave your remote.

    • If you have a Bluetooth remote, you can ignore this step.
  5. 5

    Test the remote sensor with a camera. To do this, aim your camera at your remote and start recording. The goal is to meet an Infrared eye on the remote flashing on the LCD screen of your camera when you lot press a button on the remote. If y'all do, the remote is sending a betoken and is working; withal, your TV'due south receiving sensor might exist blocked or muddy.

    • If you don't run into the light and tried the previous fixes (you've discharged whatever electronic glitches, replaced the batteries, and cleaned the manual window), yous might have a defective remote.
  6. 6

    Pair your remote with your TV over again (Smart Remotes only). Since Smart Remotes are Bluetooth uniform and Bluetooth has a chance of resetting, you lot'll desire to try re-pairing your remote with your TV before you buy another remote.

    • Press two buttons (normally the Back and Play buttons) on your remote for about 3 seconds while pointing information technology at the IR sensor on your Goggle box. The buttons for pairing change co-ordinate to which remote you have, so you might demand to refer to the user transmission for that model remote. If you lot have the 2022 Smart Remote, you'll notice the pairing button located nether the battery embrace.[i]
  7. 7

    Reset your remote to factory settings (Smart Remotes only). Samsung remotes from 2022 and newer have the ability to exist reset to factory settings past pressing and holding the Back and the button to the right of the 123 button. You can find which buttons you demand to press in the user manual.

  8. 8

    Test the TV with another remote. You tin can try using some other remote that you know works to run across if the Television set has an consequence. If the other remote works, you know the upshot is with your remote and you might demand a new one. If the other remote does non work, your Tv's sensor might be blocked or dingy (does not use to Bluetooth remotes).[2]

  9. Advertisement

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

  • Another issue is dirty battery terminals, just yous may not desire to mess with them. If you notice a lot of corrosion on the bombardment terminals, you lot tin can either make clean it or purchase a new remote.

    • If you decide to make clean the corrosion, note that battery acid is very harsh and y'all need to protect yourself outset.

Ad

About This Article

Article Summary X

1. Remove the batteries and hold any button for 20 seconds.
two. Reinsert the batteries.
three. Supersede the batteries.
four. Clean the transmission window.
5. Exam the remote sensor with a camera.
6. Exam the Tv with another remote.

Did this summary aid you?

Thank you to all authors for creating a folio that has been read seven,361 times.

Is this commodity up to appointment?

Source: https://www.wikihow.com/Repair-a-Samsung-Remote

0 Response to "How To Repair A Samsung Remote"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel